At the bottom of rack-mount and access floor, a fire detector and automatic fire-extinguishing system are installed to quickly extinguish fire, and the access floor has a lot of cable and duct systems and dust, so in case of fire, fire can spread very quickly and it is difficult to be found from the outside and to be extinguished.

  ▶ Fire detectors : Flame detector, a linear detector.
  ▶ Fire extinguisher : Fire extinguishing aerosol system.

□  Major Application Facility

1. Communication rooms.
2. Server Rooms.
3. The central control room.

  ▶ Server rack mount, Ceiling, Access-floor. . . . . . . . . . .

□ The server room, access-floor automatic fire-extinguishing system

This system monitors situation inside the rack mount in the communication room, server room, and of the lower part of access floor, operating automatic extinguishing system on fire to suppress the initial fire rapidly. It is difficult to check and approach the access floor from outside, thus difficult to see fire in the beginning, and impossible to suppress fire with a fire extinguisher. Therefore, with the installation of a flame detector, linear director, and fire extinguishing system at the lower part of access floor, if a certain set amount of fire is detected, suppress the fire by operating a fire extinguishing aerosol system.

   ▶  Fire detection : Flame detector  + Linear detector

   ▶  Extinguisher  : Fire extinguishing aerosol system

Besides, if connected with our monitoring system B100-B1-2000), integration monitoring system and remote monitoring system can be configured.

Currently they are installed and operated by several companies.